Button 1 To 4 - Beckhoff XTS Operating Instructions Manual

6.2.5 Button 1 to 4
6.2.5.1 Exit chaser mode
Version: 1.4
The LED 4 Digital output 4 [1] lights up.
You have the possibility to set the four LEDs into a chaser mode.
► Keep keys [1] to [4] pressed for five seconds
► Make sure that the switches [5] and [6] are in the upper position
LEDs [1] to [4] are in chaser mode.
► Keep keys [1] to [4] pressed for five seconds
► Make sure that the switches [5] and [6] are in the upper position
XTS Starter Kit with NCT Functionality
Functionality of the test board
─── 55