Table of Contents
Advertisement
Product overview
3.8 Intended use
3.8.1 Improper use
32
───
The XTS may be operated exclusively for the activities foreseen and
defined in this documentation, taking into account the prescribed en-
vironmental conditions.
The components must be installed in electrical systems or machines
and may only be put into operation as integrated components of the
system or machine.
All components of the XTS are intended only to be programmed and
commissioned with the help of the Beckhoff TwinCAT automation
software.
Read the entire drive system documentation:
• This translation of the original instructions
• Translation of the original instructions for the control computer
Any use exceeding the permissible values specified in the Technical
data is considered improper and therefore prohibited.
The Standard XTS is not suitable for use in the following areas:
• in ATEX zones without a suitable housing
• in areas with aggressive environments, for example aggressive
gases or chemicals
The relevant standards and directives for EMC interference emis-
sions must be complied with in residential areas.
XTS Starter Kit with NCT Functionality
Version: 1.4
Advertisement
Table of Contents
