Potentiometer; Potentiometer 1 - Analog Input 1 - Beckhoff XTS Operating Instructions Manual

6.3 Potentiometer

6.3.1 Potentiometer 1 - analog input 1
Version: 1.4
The potentiometers control the RGB LED of the PWM outputs.
Color saturation
The potentiometers convert the HSV color values into RGB colors.
By default, the color saturation S of the RGB PWM outputs is preset
to a value of 1 and can only be changed via an adjustment in the
PLC.
Note the position of the switches
Make sure that the switches are in the lower position if you want to
use all potentiometers.
When a switch is in the lower position, the analog input is without
function and the potentiometer cannot perform the corresponding
function for the RGB PWM outputs.
With potentiometer 1 the color value H for the RGB LED can be set.
► Turn potentiometer 1 [1] to set the color of the RGB LED
► Make sure that the switch [2] is in the lower position
The RGB LED [1] lights up in the set color.
XTS Starter Kit with NCT Functionality
Functionality of the test board
─── 57