Safety And Instruction; Explanation Of Symbols - Beckhoff XTS Operating Instructions Manual

1.5 Safety and instruction

1.6 Explanation of symbols

Version: 1.4
Read the contents that are related to the activities you will perform
with the product. Always read the For your safety chapter in the doc-
umentation. Observe the warning notes in the chapters so that you
can handle the product and work with it properly and safely.
Various symbols are used for a clear arrangement:
► The triangle indicates instructions that you should execute.
• The bullet point indicates an enumeration.
[...] The square brackets indicate cross-references to other text
passages in the document.
[1] The number in the square brackets refers to the position in the
adjacent figure.
[+] The plus sign in square brackets indicates ordering options
and accessories.
In order to make it easier for you to find text passages, pictograms
and signal words are used in warning notices:
DANGER
Failure to comply will result in serious or fatal injuries.
WARNING
Failure to comply may result in serious or fatal injuries.
CAUTION
Failure to comply may result in minor or moderate injuries.
NOTICE
Notes are used for important information on the product. The
possible consequences of failure to observe these include:
• Product malfunctions
• Damage to the product
• Damage to the environment
Information
This symbol indicates information, tips, and notes for handling the
product or the software.
Examples
This symbol shows examples of how to use the product or software.
Required tool
This symbol indicates a tool that is required for the following steps.
XTS Starter Kit with NCT Functionality
Documentation notes
─── 11