5.4 Connect data line
5.4.1 Control cabinet
5.4.2 PC or laptop
Version: 1.4
The data line connects the control cabinet with your PC or your lap-
top.
The cap for connecting the data line is attached to the connector
with a wire and remains on the control cabinet.
► Open cap [1]
► Connect the connector [1] of the data line to the connector [2] in
the control cabinet
► Plug the connector [1] of the data line into the corresponding port
of your PC [2] or laptop [3]
XTS Starter Kit with NCT Functionality
Commissioning
───
47