Table of Contents
Advertisement
7 Assembly and disassembly
7.1 Mover
7.1.1 Rail on support
Position
Assembly
Version: 1.4
The pre-assembled movers can be removed and inserted.
Example XTS starter kit with open end
The removal and insertion of the movers is exemplified by an XTS
starter kit with open end.
The rail on support [+] ZK9001-0000 is available for removing and
inserting the movers on a circulating system. For more information,
refer to the original operating instructions XTS | linear product trans-
port:
Direct link to the XTS original operating instructions
The rail on support supplied must be mounted for inserting and re-
moving the movers.
The rail on support may only be mounted on the motor module with-
out connectors.
NOTICE
Installing the rail on support correctly
If the rail on support is mounted on the motor module with con-
nectors, there is an offset between the rail on support and the
guide rail.
If you mount the rail on support on the motor module with con-
nector, damage to the mover and the guide rail may result.
► Remove screws [1]
► Remove end cap [2]
XTS Starter Kit with NCT Functionality
Assembly and disassembly
───
59
Advertisement
Table of Contents
