Cw Modulation Delay Time; Audio Frequency - Kenwood TKR-D710 Function Reference

8 CW ID

8.5 CW Modulation Delay Time

8.5 CW Modulation Delay Time
CW Modulation Delay Time is the length of time from when the repeater starts transmitting until the repeater starts
sending a CW ID.
During the period from when the repeater starts transmitting until the amount of time configured in CW Modulation
Delay Time elapses, the repeater transmits an unmodulated signal. If the amount of time configured in CW
Modulation Delay Time elapses, the repeater starts sending a modulated signal of the CW ID.
Note
If "Off" is configured in CW Modulation Delay Time, the repeater sends a CW ID immediately after the repeater starts
transmitting.
Configuration using KPG-174D
Configuring CW Modulation Delay Time (
8.6

Audio Frequency

Audio Frequency is the frequency used to send a CW ID.
Configuration using KPG-174D
Configuring Audio Frequency (
FUNC (E)/Ver 2.50
Transmit
Transmit Interval Time Start Interval
Transmit Delay Time Start
CW Modulation Delay Time
CW ID
Figure 8-3 CW Modulation Delay Time
Edit > Channel Information > Channel Edit > CW ID)
See
Edit > Channel Information > Channel Edit > CW ID)
See
Transmit
Interval
Start Stop
Transmit
CONTENTS INDEX 64