Functions And Panel Layout; Front Panel - Kenwood TKR-D710 Function Reference

1

FUNCTIONS AND PANEL LAYOUT

1.1

Front Panel

Speaker
1
Emits the received audio and alert tones.
TX LED
2
Lights while the repeater is transmitting. In other
cases, this LED lights or flashes depending on the
status of the repeater. (Refer to
7-segment LED Display
3
Displays the channel name and error status with
the 2-digit 7-segment LED display.
(Refer to 7-segment LED.)
BUSY LED
4
Lights while the repeater is receiving a signal. In
other cases, this LED lights or flashes depending
on the status of the repeater.
(Refer to BUSY LED.)
Volume
5
Adjusts the volume level of the speaker.
Power Switch
6
Pressing this switch turns the repeater on and
pressing this switch again turns the repeater off.
FUNC (E)/Ver 2.50
Figure 1-1 Front Panel
TX LED.)
1 2 3 4 5
8
POWER LED
7
Power LED lights green while the power source is
supplied to the repeater.
PF Keys
8
Pressing any PF key, the LED lights red and the
function preassigned to the key is activated or
enabled. (Refer to Key
8-pin Microphone Connector
9
Connects a microphone for a call and connects the
repeater to a PC by using the KPG-46A, KPG-46U
or KPG-46X programming cable for
communications.
CONTENTS
6 7
9
LED.)
INDEX 1