Kenwood TKR-D710 Function Reference page 83

8 CW ID
8.7 Interval Activity Transmit
8.7 Interval Activity Transmit
Interval Activity Transmit is the function to control the intervals to send a CW ID.
If this function is enabled, the repeater sends a CW ID after the amount of time configured in Transmit Interval
Time elapses only if the repeater starts transmitting while the amount of time configured in Transmit Interval Time
is counting down. If no transmission is made after sending the CW ID last time, the repeater does not send the CW
ID even after the amount of time configured in Transmit Interval Time elapses.
If this function is disabled, regardless of the status for whether or not the repeater has transmitted a CW ID, the
repeater sends the CW ID when the amount of time configured in Transmit Interval Time elapses.
Note
Interval Activity Transmit is not applied when the repeater sends a CW ID by using the CW ID On function.
Configuration using KPG-174D
Configuring Interval Activity Transmit to be enabled or disabled (
Edit > CW ID)
FUNC (E)/Ver 2.50
Voice Call
Transmit Interval Time Interval
CW ID
Figure 8-4 Interval Activity Transmit
Voice Call
Interval Interval
Transmit
Edit > Channel Information > Channel
See
CONTENTS INDEX 65