Channel Spacing; Configuring The Priority Order Of Transmission (Ptt Priority) - Kenwood TKR-D710 Function Reference

4 TRANSMISSION/ RECEPTION/ REPEAT

4.3 Channel Spacing

4.3 Channel Spacing
Channel Spacing is the channel spacing used by the repeater to transmit and receive.
Channel spacing is the spacing of frequencies between adjacent channels.
Channel Spacing (Analog)
The following is the channel spacing applied when the repeater transmits and receives on an analog channel.
The channel spacing can be configured for each channel by using KPG-174D.
Channel Spacing (DMR)
The channel spacing applied when the repeater transmits and receives on a DMR digital channel is Narrow (12.5 kHz).
The channel spacing of a DMR digital channel cannot be configured by using KPG-174D.
Configuration using KPG-174D
Configuring Channel Spacing (Analog) (
4.4

Configuring the Priority Order of Transmission (PTT Priority)

The following are the transmission methods of the repeater:
• Mic PTT (PTT (microphone) switch)
• Repeat PTT
• Network PTT
• Console PTT
PTT Priority is the priority order of these transmission methods. Multiple factors for transmission may overlap when
the repeater is operated. In these cases, by switching to the signaling and modulated signal line that match a
prioritized PTT, the repeater can switch to the PTT having higher priority when the repeater is transmitting using a
PTT having lower priority.
If a PTT having the higher priority is activated while the repeater is transmitting using a PTT having the lower priority,
the repeater switches to the signaling and modulation signal line configured for the PTT having higher priority.
PTT
Mic PTT
Repeat PTT
Console PTT
Network PTT
Configuration using KPG-174D
Configuring PTT Priority (
FUNC (E)/Ver 2.50
Table 4-4 Channel Spacing (Analog)
Channel Spacing
Wide 5k
Narrow
Edit > Channel Information > Channel Edit)
See
Table 4-5 PTT Priority
Signaling
Depends on the Encode Tone (Multiple)
configuration. (Refer to Waiting to Receive by
Multiple Signaling (Multiple Encode/Decode
Table).)
Transmits by the Color Code configured in the
repeater of the incoming call.
Edit > Optional Features > Common Page 1)
See
Bandwidth
25 kHz
12.5 kHz
Modulation Signal Line
Local Mic
Received audio
Received audio (IP network)
CONTENTS INDEX 14