Kenwood TKR-D710 Function Reference page 97

9 FUNCTION PORTS
9.2 Available Functions for the AUX Input Ports
Function Name
Repeat Disable
Repeat Enable
Repeat Enable/Disable
Reset
Squelch Off
Squelch On
Squelch On/Off
Test Tone Off
Test Tone On
FUNC (E)/Ver 2.50
Description
Disables the capability to transmit the received signal
by using the Repeat PTT control.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Repeat Enable" state when the
status of the port goes high level.
Enables the capability to transmit the received signal by
using the Repeat PTT control.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Repeat Disable" state when the
status of the port goes high level.
Enables or disables the capability to transmit the
received signal using the Repeat PTT control.
The repeater returns to the same state as when the
repeater is turned on.
The repeater opens squelch and unmutes the speaker.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Squelch On" state when the
status of the port goes high level.
Closes the squelch and mutes the received audio.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Squelch Off" state when the status
of the port goes high level.
Enables or disables the squelch.
Stops transmitting a test tone.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Test Tone On" state when the
status of the port goes high level.
Starts transmitting a test tone.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Test Tone Off" state when the
status of the port goes high level.
Remarks
Refer to Toggling Repeat Behaviors
Between Enabled and Disabled (Repeat
Enable/Disable).
• Refer to Toggling Repeat Behaviors
Between Enabled and Disabled
(Repeat Enable/Disable).
• This function can be assigned only if
"Trailing Edge" is configured in AUX
Input Trigger. (Refer to Trigger
Detection at the AUX Input Port (AUX
Input Trigger).)
Refer to Executing Software Reset of the
Repeater (Reset).
Refer to Temporarily Disabling the
Squelch (Squelch Off).
• Refer to Temporarily Disabling the
Squelch (Squelch Off).
• This function can be assigned only if
"Trailing Edge" is configured in AUX
Input Trigger. (Refer to Trigger
Detection at the AUX Input Port (AUX
Input Trigger).)
Refer to Transmitting a Test Tone during
Transmission (Test Tone).
CONTENTS INDEX 79