Power-On Tone; Control Tone; Warning Tone - Kenwood TKR-D710 Function Reference

5 SOUND
5.1 Tones that Sound When a User Operates the Repeater or When the Repeater Status Is Changed

Power-on Tone

Power-on Tone is the tone which sounds from the repeater when the repeater is turned on.
The volume level of Power-on Tone can be configured by using KPG-174D.
(Refer to Configuring the Volume Level of Each Tone (Tone
Configuration using KPG-174D
Configuring Power-on Tone to be enabled or disabled (

Control Tone

Control Tone is the tone which sounds from the repeater when a PF key is pressed.
The volume level of Control Tone can be configured by using KPG-174D.
(Refer to Configuring the Volume Level of Each Tone (Tone
Tone Name
Key Press Tone (A)
Key Press Tone (B)
Key Input Error Tone
Roll Over Tone
Configuration using KPG-174D
Configuring Control Tone to be enabled or disabled (

Warning Tone

Warning Tone is the tone which sounds from the repeater before or when the repeater becomes disabled from
transmitting, or when the repeater attempts to transmit while the repeater is disabled from transmitting.
The volume level of Warning Tone can be configured by using KPG-174D.
(Refer to Configuring the Volume Level of Each Tone (Tone
Tone Name
Warning Alert Tone
TOT Pre-Alert Tone
PLL Un Lock Tone
Configuration using KPG-174D
Configuring Warning Tone to be enabled or disabled (
FUNC (E)/Ver 2.50
Table 5-2 Control Tone
This tone sounds from the repeater when the function is enabled by pressing a PF key.
This tone sounds from the repeater when the function is disabled by pressing a PF key.
This tone sounds from the repeater when a PF key is not accepted when the key is pressed.
This tone sounds from the repeater when the lowest channel is selected by pressing a PF key.
Table 5-3 Warning Tone
This tone sounds from the repeater while the PTT (microphone) switch is pressed and held after
Time-out Timer for the PTT (microphone) switch expired or while the TOT Rekey Time is counting
down.
Also, this tone sounds from the repeater when the repeater attempts to transmit while transmission
is disabled by functions such as TX Disable.
This tone sounds from the repeater when transmission is about to end by Time-out Timer.
This tone sounds from the repeater while PLL is unlocked.
Volume).)
Edit > Optional Features > Common Page 2 > Tone)
See
Volume).)
Description
Edit > Optional Features > Common Page 2 > Tone)
See
Volume).)
Description
Edit > Optional Features > Common Page 2 > Tone)
See
CONTENTS INDEX 27