7 DMR DIGITAL COMMUNICATION
7.9 Limiting the IDs for Repeat Transmission (User List (Group ID)/ User List (User ID))
Note
If the Unit ID and Group ID to be used for a DMR digital signal call are not permitted for use, the call cannot be made because
the repeater does not transmit the repeat transmission. In this case, the receiving subscriber unit is in a silent receiving mode
because the repeater continues to transmit an idle signal to allow the call to be transmitted in a vacant slot.
Configuration using KPG-174D
Configuring User List (Group ID) and User List (User ID) to be enabled or disabled (
Information > Channel Edit)
FUNC (E)/Ver 2.50
Figure 7-3 User List (Group ID)/ User List (Unit ID)
Edit > Channel
See
CONTENTS
INDEX
58