Embedding A Message In The Repeater (Embedded Message); Embedded Message; Embedded Message With Password - Kenwood TKR-D710 Function Reference

2 GETTING STARTED

2.4 Embedding a Message in the Repeater (Embedded Message)

2.4 Embedding a Message in the Repeater (Embedded Message)
The message can be written to the repeater by using KPG-174D.

Embedded Message

Embedded Message is the function to store a maximum of 64 alphanumeric characters in the repeater. Unique
profiles of the repeater, such as a serial number and a file name of configuration data written to the repeater, can be
stored in the repeater.
The message can be written to the repeater by using KPG-174D. The embedded message is stored as a part of the
configuration data in the repeater.
The embedded messages can be read from the repeater by using KPG-174D.
Configuration using KPG-174D
Configuring Embedded Message (

Embedded Message with Password

Embedded Message with Password is the function to store in the repeater a maximum of 64 alphanumeric
characters with a password.
Unique profiles for a repeater, such as a serial number and a file name of configuration data written to the repeater,
can be stored in the repeater with a password.
The message and the password can be written to the repeater by using KPG-174D. Embedded Message with
Password is stored as data separate from the configuration data, not as part of the configuration data.
The password must be entered to write a message. The message cannot be written to the repeater unless the
correct password is entered.
The embedded messages can be read from the repeater by using KPG-174D.
Configuration using KPG-174D
Configuring Embedded Message with Password (
FUNC (E)/Ver 2.50
Edit > Embedded Message)
See
Edit > Embedded Message with Password)
See
CONTENTS INDEX 9