Data Vox Settings; Data Vox Delay Time Setting; Data Vox Gain Setting; Allocating Data Send Functions To Pf Keys - Kenwood TS-590SG Setting Manual

Reference:
To implement data communications, turn this function OFF.

4.1.4 Data VOX Settings

Set whether or not to use the VOX function for the audio output from the rear terminal.
Menu No.
76
The default setting is OFF.
Caution:
 When this function is ON, all sounds created by the computer other than the
intended audio transmissions are also transmitted, so be careful.
 When using this function for the first time, we recommend connecting a dummy
load to the TS-590SG to perform checks and adjustments.

4.1.5 Data VOX Delay Time Setting

Set the VOX Delay Time Setting when using the Data VOX function.
Menu No.
77
The default setting is 50.

4.1.6 Data VOX Gain Setting

Set the VOX Gain Setting when using the Data VOX function.
Menu No.
78
The default setting is 4.

4.1.7 Allocating DATA SEND Functions to PF Keys

Set the DATA SEND functions to the PF keys to test the transmission of audio input
from the rear terminal. In this example, the [PF A] key has been set.
Menu No.
87
The default setting is 200 (VOICE1).
Function
Data VOX
Function
Data VOX delay time
Function
Data VOX gain for the USB audio input
Function
Front panel PF A key assignment
7
Set value
ON or OFF
Setting range
0 to 100
Setting range
0 to 9
Set value
206