Kenwood TKR-D710 Function Reference page 143

14
PROTECTING DATA OF THE REPEATER BY A PASSWORD
The repeater is equipped with a password function for protecting the configuration data of the repeater.
14.1 Password When Reading Configuration Data in a PC
(Read Authorization Password)
Read Authorization Password is the function to protect the configuration data in the repeater and prevents the
operating frequencies from being read by an unauthorized person if an unexpected situation occurs, such as when
the repeater is stolen.
To read configuration data by using KPG-174D from the repeater with Read Authorization Password configured,
the password must be entered on a PC. If the password does not match, the configuration data configured for the
repeater cannot be read.
Configuration using KPG-174D
Configuring Read Authorization Password (
Password)
14.2 Password When Writing Configuration Data (Overwrite Password)
Overwrite Password is the function to protect the configuration data in the repeater and prevents the frequency
data from being overwritten by an unauthorized person if an unexpected situation occurs, such as when the repeater
is stolen.
To write configuration data by using KPG-174D to the repeater with Overwrite Password configured, the password
must be entered on a PC. If the password does not match, the configuration data cannot be written to the repeater.
Configuration using KPG-174D
Configuring Overwrite Password (
14.3 Password When Accessing the Repeater
(Network Password)
Network Password is the password used when the repeater and a PC with KPG-174D installed communicate via
an IP network.
If Network Password is configured for the repeater, entering a password is required on a PC when the following
operations are executed via an IP network by using KPG-174D. If the password does not match, these operations
cannot be executed.
• Read Data from the Repeater
• Write Data to the Repeater
• Repeater Information
If the access to the repeater succeeds by entering a password when one of the above operations is executed, the
password does not need to be entered again until KPG-174D exits.
Configuration using KPG-174D
Configuring Network Password (
FUNC (E)/Ver 2.50
Edit > Optional Features > Common Page 1 > Data
See
Edit > Optional Features > Common Page 1 > Data Password)
See
Edit > Optional Features > Common Page 1 > Data Password)
See
CONTENTS INDEX 125