Channel Hangtime (Dmr Channel) - Kenwood TKR-D710 Function Reference

7 DMR DIGITAL COMMUNICATION
7.6 Continuing Transmission for a Certain Length of Time After Various Transmissions End

Channel Hangtime (DMR Channel)

Channel Hangtime (DMR Channel) is the function that is used to retain a channel for a certain length of time after
the repeater ends transmission in the DMR format on a DMR digital channel.
The repeater starts repeat transmission after a subscriber unit transmits a DMR digital signal on a DMR digital
channel. The repeater retains a channel and continues repeat transmission for the length of time configured in
Channel Hangtime (DMR Channel) after the repeater ends transmission of a DMR digital signal.
Channel Hangtime (DMR Channel) can be toggled between enabled and disabled when a PF key is operated,
when a signal is applied to an AUX Input port, or when the repeater is turned on.
Table 7-5 Toggling Channel Hangtime (DMR Channel) Between Enabled and Disabled
Trigger
PF key
AUX Input Port
Startup
Note
• This function works on a channel with "DMR" configured in Channel Type.
(Refer to Configuring the Reception Method of a Channel (Channel
• While the Channel Hangtime (DMR Channel) is counting down, the repeater does not start repeat transmission even if the
repeater receives an analog signal.
• If both Call Hangtime and Channel Hangtime (DMR Channel) are configured in the repeater, the countdown of the Channel
Hangtime (DMR Channel) starts after the countdown of the Call Hangtime ends.
• If Data Hangtime is configured in the repeater, the countdown of the Channel Hangtime (DMR Channel) starts after the Data
Hangtime ends.
• If the countdown of the Channel Hangtime (DMR Channel) or Channel Hangtime (Mixed Channel) is extremely shortened,
the DMR digital communication required for repeat transmission may not function properly.
Configuration using KPG-174D
Configuring Channel Hangtime (DMR Channel) (
Network/ Console PTT)
FUNC (E)/Ver 2.50
Assigned Function
Channel Hangtime Enable/Disable
Channel Hangtime Disable
Channel Hangtime Enable
Channel Hangtime Enable/Disable
Channel Hangtime Disable
Channel Hangtime Enable
Edit > Optional Features > Common Page 1 > Repeater/
See
See
Available Functions for the PF Keys
Available Functions for the AUX Input
Ports
Available Functions for Startup
Type).)
CONTENTS INDEX 52