Configuring The Group Ids Permitted For Repeat Transmission All At Once (Group Id Range) - Kenwood TKR-D710 Function Reference

Hide thumbs Also See for TKR-D710:
Table of Contents

Advertisement

7 DMR DIGITAL COMMUNICATION
7.9 Limiting the IDs for Repeat Transmission (User List (Group ID)/ User List (User ID))

Configuring the Group IDs Permitted for Repeat Transmission All at Once (Group ID Range)

Group ID Range is the list in which the multiple Group IDs permitted for repeat transmission on a DMR digital
channel are configured all at once as a Range list.
The repeater repeats when receiving a call by the Group ID which is configured in Group ID Range and for which
"Yes" is configured in Valid. Because subscriber units using unauthorized Group IDs are not repeated, the repeater
cannot communicate with these subscriber units. In this case, the receiving subscriber unit is in a silent receiving
mode because the repeater continues to transmit an idle signal to allow the call to be transmitted in a vacant slot.
A maximum of 16,776,415 Group IDs in a maximum of 64 Range lists can be configured in Group ID Range by
using KPG-174D.
Figure 7-1 Group ID Range
Note
• A Group ID is directly entered in Start ID and End ID in the same manner as entering a Group ID in Group ID List.
• If a Group ID is entered in Start ID, the same Group ID is automatically entered in End ID.
• Enter the Range list from the Start ID. If a Group ID is not entered in Start ID, the End ID cannot be entered.
• "ALL" and "Unaddress" of Group ID Range can only be configured in Start ID.
(If "ALL" or "Unaddress" is configured in Start ID, the Range list is handled as one Range list.)
• If "Unaddress" is configured in Start ID, the repeater is permitted to use the codes $FFFFE0 to $FFFFEF.
• If "ALL" is configured in Start ID, the repeater is permitted to use all codes.
• If the Start ID is deleted, the corresponding Range list will be deleted.
• A Group ID cannot be redundantly configured in a Range list.
Configuration using KPG-174D
Configuring Group ID Range (
Edit > User List > Group ID Range)
See
FUNC (E)/Ver 2.50
CONTENTS
INDEX
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tkr-d810

Table of Contents