Kenwood TKR-D710 Function Reference page 96

9 FUNCTION PORTS
9.2 Available Functions for the AUX Input Ports
Function Name
Decode Signaling Disable
Decode Signaling Enable
Decode Signaling Enable/
Disable
Encode Signaling Disable
Encode Signaling Enable
Encode Signaling Enable/
Disable
FUNC (E)/Ver 2.50
Description
Disables the signaling decode with the QT tone or DQT
code.
"None" is considered to be configured in QT/DQT
Decode when receiving even on a channel with the QT
tone or DQT code configured.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Decode Signaling Enable" state
when the status of the port goes high level.
Enables the signaling decode with the QT tone or DQT
code.
The repeater decodes with the QT tone or DQT code
configured for a channel.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Decode Signaling Disable" state
when the status of the port goes high level.
Enables or disables the signaling decode with the QT
tone or DQT code.
Disables the signaling encode with the QT tone or DQT
code.
Transmission is started with "None" configured in QT/
DQT Decode even on a channel with the QT tone or
DQT code configured.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Encode Signaling Enable" state
when the status of the port goes high level.
Enables the signaling encode with the QT tone or DQT
code.
The repeater sends the QT tone or DQT code
configured for the channel when the repeater transmits.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Encode Signaling Disable" state
when the status of the port goes high level.
Enables or disables the signaling encode with the QT
tone or DQT code.
Remarks
Refer to Toggling the QT/DQT Decode
Between Enabled and Disabled (Decode
Signaling Enable/Disable).
• Refer to Toggling the QT/DQT Decode
Between Enabled and Disabled
(Decode Signaling Enable/Disable).
• This function can be assigned only if
"Trailing Edge" is configured in AUX
Input Trigger. (Refer to Trigger
Detection at the AUX Input Port (AUX
Input Trigger).)
Refer to Toggling the QT/DQT Encode
Between Enabled and Disabled (Encode
Signaling Enable/Disable).
• Refer to Toggling the QT/DQT Encode
Between Enabled and Disabled
(Encode Signaling Enable/Disable).
• This function can be assigned only if
"Trailing Edge" is configured in AUX
Input Trigger. (Refer to Trigger
Detection at the AUX Input Port (AUX
Input Trigger).)
CONTENTS INDEX 78