Kenwood TKR-D710 Function Reference page 95

9 FUNCTION PORTS
9.2 Available Functions for the AUX Input Ports
Function Name
Local TX Enable/Disable
Low Power Off
Low Power On
Low Power On/Off
Monitor Off
Monitor On
Monitor On/Off
FUNC (E)/Ver 2.50
Description
Enables or disables the capability to transmit by using
the PTT (microphone) switch.
Switches the transmit power from Low to High.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Low Power On" state when the
status of the port goes high level.
Switches the transmit power from High to Low.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Low Power Off" state when the
status of the port goes high level.
Toggles the transmit power between Low and High.
Enables the signaling decode with the QT tone or DQT
code. The repeater unmutes the speaker when the
signaling matches.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Monitor On" state when the status
of the port goes high level.
Disables the signaling decode with the QT tone or DQT
code. The repeater unmutes the speaker when the
repeater receives a signal.
If "Level" is configured in AUX Input Trigger, the AUX
Input port enters the "Monitor Off" state when the status
of the port goes high level.
Enables or disables the signaling decode with the QT
tone or DQT code.
Remarks
• Refer to Toggling the Capability to
Transmit by Using the PTT
(microphone) Switch between Enabled
and Disabled (Local TX Enable/
Disable).
• This function can be assigned only if
"Trailing Edge" is configured in AUX
Input Trigger. (Refer to Trigger
Detection at the AUX Input Port (AUX
Input Trigger).)
This function works only on a channel
with "High" configured in Transmit
Power. (Refer to Transmission Power
(Transmit Power).)
• This function works only on a channel
with "High" configured in Transmit
Power. (Refer to Transmission Power
(Transmit Power).)
• This function can be assigned only if
"Trailing Edge" is configured in AUX
Input Trigger. (Refer to Trigger
Detection at the AUX Input Port (AUX
Input Trigger).)
Refer to Temporarily Disabling the
Signaling (Monitor).
• Refer to Temporarily Disabling the
Signaling (Monitor)
• This function can be assigned only if
"Trailing Edge" is configured in AUX
Input Trigger. (Refer to Trigger
Detection at the AUX Input Port (AUX
Input Trigger).)
CONTENTS INDEX 77