Kenwood TKR-D710 Function Reference page 106

10 CONTROLLING THE REPEATER BY REMOTE CONTROL (REMOTE CONTROL)
10.1 Controlling the Functions Assigned to the PF Keys
Sending a Transpond Code (PF Key)
Transponder (PF Key) is the function that notifies the transmitting subscriber unit that the repeater has received an
Air Remote code by sending a Transpond code, when the repeater receives an Air Remote code and then the
functions assigned to the PF keys become active or inactive, or enabled or disabled.
The timing to send a Transpond code can be selected from "None", "Before", "After", and "Both" for each function.
Configuration
None
Before
After
Both
About the configuration of a Transpond code
Each Transpond code which is sent when the function assigned to the PF key becomes active or inactive, or
enabled or disabled, after the repeater receives an Air Remote code can be configured.
A Transpond code can be configured for each of Activation (PF Key Transponder) and Deactivation (PF Key
Transponder) by using KPG-174D.
Configuration
Activation
Deactivation
About the configuration of Single Tone
Single Tone is the function to send a Transpond code by using a single tone.
If this function is enabled, the repeater sends a Transpond code by using a single tone. In this case, the frequency
and the transmit duration of the single tone to be sent can be selected from Encode/Decode List of DTMF.
(Refer to Encode/Decode
If this function is disabled, the repeater sends the DTMF code configured in Encode/ Decode List of DTMF as a
Transpond code.
Configuration using KPG-174D
• Configuring Transponder (PF Key) (
• Configuring PF Key Transponder (
• Configuring Single Tone to be enabled or disabled (
Transponder)
FUNC (E)/Ver 2.50
Table 10-1 Transponder (PF Key)
The repeater does not send a Transpond code.
The repeater sends a Transpond code when the repeater receives an Air Remote code. If
transmission is disabled, the repeater does not send a Transpond code.
The repeater sends a Transpond code after the repeater processes the received Air Remote code.
If transmission is disabled, the repeater does not send a Transpond code. Also, the repeater does
not send a Transpond code if the repeater cannot process the Air Remote code.
The repeater sends a Transpond code when the repeater receives an Air Remote code and after
the repeater processes the received Air Remote code. If transmission is disabled, the repeater
does not send a Transpond code.
Table 10-2 PF Key Transponder
The repeater sends a Transpond code when the repeater receives an Air Remote code and then
the functions assigned to the PF keys become active or enabled.
The repeater sends a Transpond code when the repeater receives an Air Remote code and then
the functions assigned to the PF keys become inactive or disabled.
List.)
Edit > Remote Control > PF Key > PF Key)
See
Edit > Remote Control > PF Key > PF Key Transponder)
See
Description
Description
Edit > Remote Control > PF Key > PF Key
See
CONTENTS INDEX 88