Configuring The Conditions To Initiate An Intersite Call (Site Group) - Kenwood TKR-D710 Function Reference

7 DMR DIGITAL COMMUNICATION
7.9 Limiting the IDs for Repeat Transmission (User List (Group ID)/ User List (User ID))

Configuring the Conditions to Initiate an Intersite Call (Site Group)

Site Group is the function to determine how the repeater initiates an Intersite Call when a Group Call to the target
Group ID is initiated or when an Individual Call to the target Unit ID is initiated.
By using KPG-174D, the behavior of the repeater when the repeater initiates an Intersite Call can be configured for
each ID configured in Unit ID List and Unit ID Range as well as Group ID List and Group ID Range.
If an Individual Call is received, an Intersite Call will be sent according to the Site Group configured for the target
Unit ID. However, if both Unit ID List and Unit ID Range are disabled, an Intersite Call will be sent according to the
Site List configured for each channel.
If a Group Call is received, an Intersite Call will be sent according to the Site Group configured for the target Group
ID. However, if both Group ID List and Group ID Range are disabled, an Intersite Call will be sent according to the
Site List configured for each channel.
Depending on the configuration in Site Group, the repeater behavior when initiating an Intersite Call varies as
follows:
Configuration
Local
Selected Channel
1 to 32 (Available number of Site Group Table)
Configuration using KPG-174D
• Configuring Site Group (Group ID List) (
• Configuring Site Group (Group ID Range) (
• Configuring Site Group (Unit ID List) (
• Configuring Site Group (Unit ID Range) (
FUNC (E)/Ver 2.50
Table 7-7 Site Group
No Intersite Call is initiated. The repeater transmits by only relaying
the received signals.
The repeater initiates the Intersite Call according to the Site List
configured for the selected channel.
The repeater initiates the Intersite Call according to the configuration
of the Site Group Table for the configured number.
(Refer to Configuring the Target of an Intersite Call (Site Group
Table).)
Edit > User List > Group ID List)
See
Edit > User List > Group ID Range)
See
Edit > User List > Unit ID List)
See
Edit > User List > Unit ID Range)
See
Description
CONTENTS INDEX 59