Cw Id; Transmit Interval Time - Kenwood TKR-D710 Function Reference

8 CW ID

8.1 CW ID
8.1 CW ID
A Morse code containing a maximum of 32 characters can be configured. A single CW ID can be configured for each
channel.
Configuration using KPG-174D
Configuring CW ID (
See
8.2

Transmit Interval Time

Transmit Interval Time is the interval to send a CW ID. The repeater sends a CW ID repeatedly using the interval
configured in Transmit Interval Time.
Note
The countdown for the Transmit Interval Time starts under the following conditions:
• When the repeater is reset
• When a channel is changed
• When the CW ID On function is activated
Configuration using KPG-174D
Configuring Transmit Interval Time (
FUNC (E)/Ver 2.50
Edit > Channel Information > Channel Edit > CW ID)
Transmit Interval Time Start Interval
CW ID
Figure 8-1 Transmit Interval Time
Edit > Channel Information > Channel Edit > CW ID)
See
Interval Interval
Transmit Transmit
CONTENTS INDEX 62