Kenwood TKR-D710 Function Reference page 116

10 CONTROLLING THE REPEATER BY REMOTE CONTROL (REMOTE CONTROL)
10.3 Controlling AUX Output Ports
Sending a Transpond Code (AUX Output)
Transponder (AUX Output) is the function to notify the transmitting subscriber unit that the repeater has received
an Air Remote code by sending a Transpond code when the repeater receives the Air Remote code, and then the
functions assigned to AUX Output ports become active or inactive, or enabled or disabled.
This function can be used only if no function is assigned to an AUX Output port (None).
The timing to send a Transpond code can be selected from "None", "Before", "After", and "Both" for each function.
Configuration
None
Before
After
Both
About the configuration of a Transpond code
Each Transpond code which is sent when the functions assigned to AUX Output ports become active or inactive, or
enabled or disabled, after the repeater receives an Air Remote code can be configured.
A Transpond code can be configured for each of Activation (AUX Transponder) and Deactivation (AUX
Transponder) by using KPG-174D.
Configuration
Activation
Deactivation
FUNC (E)/Ver 2.50
Table 10-5 Transponder (AUX Output)
The repeater does not send a Transpond code.
The repeater sends a Transpond code when the repeater receives an Air Remote code. If
transmission is disabled, the repeater does not send a Transpond code.
The repeater sends a Transpond code after the repeater processes the received Air Remote code.
If transmission is disabled, the repeater does not send a Transpond code. Also, the repeater does
not send a Transpond code if the repeater cannot process the Air Remote code.
The repeater sends a Transpond code when the repeater receives an Air Remote code and after
the repeater processes the received Air Remote code. If transmission is disabled, the repeater
does not send a Transpond code.
Table 10-6 AUX Transponder
The repeater sends a Transpond code when an AUX Output port becomes active after the repeater
receives an Air Remote code.
The repeater sends a Transpond code when an AUX Output port becomes inactive after the
repeater receives an Air Remote code.
Description
Description
CONTENTS INDEX 98