Kenwood TKR-D710 Function Reference page 5

About Programming Software
About Programming Software
Various functions and parameters of the repeater can be configured by using the KPG-174D software. Various
functions can be enabled by connecting the repeater to a PC by using the KPG-46A/ KPG-46U/ KPG-46X
programming cable and writing the data configured using KPG-174D to the repeater. In this manual, a
corresponding reference in the help texts of KPG-174D is described. Therefore, you can configure the function by
referring to the function also appearing in the help texts.
About Options to Use the Functions Described in This Document
To use the functions described in this document, the following KENWOOD optional accessories need to be prepared
on your own as necessary:
• KPG-46A
• KPG-46U
• KPG-46X
How to Search for Information
For your convenience of reading through this document using Adobe Acrobat or Adobe Reader, a link to a
corresponding item is pasted in the Contents page, Index page, the lower part of each page and in the context.
Clicking the portion where a link is pasted enables a jump to the corresponding page.
Placing a pointer over the portion where a link is pasted changes the shape of the pointer to a hand (
CONTENTS
Clicking a title in the Contents page allows a jump to the corresponding page.
FUNC (E)/Ver 2.50
).
CONTENTS INDEX iv