Writing The Configuration Data To The Repeater; Reading The Configuration Data From The Repeater - Kenwood TKR-D710 Function Reference

2 GETTING STARTED

2.2 Writing the Configuration Data to the Repeater

2.2 Writing the Configuration Data to the Repeater
Selecting "Write Data to the Repeater" from the Program pulldown menu in the main window of KPG-174D opens
the Write Data to the Repeater dialog box. Clicking the "Write" button starts the writing of the configuration data.
Figure 2-4 Write Data to the Repeater Dialog Box (Display Example When a COM Connection Is Established)
Note
When writing is executed with the Time Adjustment checkbox clicked on in the Write Data to the Repeater dialog box, the
time configured in a PC is automatically configured in the repeater.
Configuration using KPG-174D
Writing the configuration data to the repeater (
2.3

Reading the Configuration Data from the Repeater

To change the data configured in the repeater, read the configuration data from the repeater to KPG-174D, and then
write the configuration data to the repeater after the configuration data has been changed.
Selecting "Read Data from the Repeater" from the Program pulldown menu in the main window of KPG-174D opens
the Read Data from the Repeater dialog box. Clicking the "Read" button starts the reading of the configuration
data.
Figure 2-5 Read Data from the Repeater Dialog Box (Display Example When a COM Connection Is Established)
Configuration using KPG-174D
Reading the configuration data from the repeater (
FUNC (E)/Ver 2.50
Program > Write Data to the Repeater)
See
Program > Read Data from the Repeater)
See
CONTENTS INDEX 8