Selection Of Data Storage Location; Storage And Reading Of Configuration Data; Copying From The Internal Memory To The Usb Flash Drive - Kenwood TS-890S In-Depth Manual

Selection of Data Storage Location

By default, the transceiver saves in the internal memory (the maximum storage space is 1 GB). The transceiver can save
in the USB flash drive connected to the transceiver by changing the configuration.
The storage location is changed in "File Storage Location" of the "USB/File Management" menu. To activate the "USB/
File Management" menu, press F[USB/FILE] after [MENU] key is pressed to open the menu screen.
In addition, when removing the USB flash drive, always execute the "Safe Removal of USB Flash Drive" operation (select
"Safe Removal of USB Flash Drive" in the "USB/File Management" menu above).

Storage and Reading of Configuration Data

Data configured in the transceiver can be stored in a file as configuration data. The configuration that was stored can be
restored by reading the data in the stored file.
When reading, the reading of the configuration data which depends on the placement environment such as the LAN
configuration and the configuration related to the rear panel connector can be excluded.

Copying from the Internal Memory to the USB Flash Drive

The data stored in the internal memory can be copied to a USB flash drive.
Select "Copy Files to USB Flash Drive" from the "USB/File Management" menu to open the screen to select the target for
copying.
Press F4 [OK] after the item to copy is selected here to copy the file included in the selected item to the appropriate
folder of the USB flash drive.
Software 09
59