Repeater Operation - Kenwood TS-450S Instruction Manual

4-14. REPEATER OPERATION
A 29MHz repeater can communicate with amateur radio
stations over wide areas.
i Note
: CO To transmit on a repeater, an optional tone unit
| (TU-8) is sometimes required.
| ©) When the tone unit (TU-8) is installed, select the
tone frequency and select either continuous tone or
|
| burst. |
| ΚΌΡΗΝ
(0)
. Set the transmit frequency of the repeater in VFO A.
Example: if 29.650 MHz FM is set іп VFO А
. Press the A/B key.
. Set the receive frequency of the repeater to be
accessed in VFO B.
Example: If 29.550 MHz FM is set in VFO B
. Press the A/B key.
. Press the SPLIT key. The SPLIT indicator and the
VFO A and VFO B operating conditions are displayed.
. Press the TONE key. The T indicator lights.
. If desired, store the data in a memory channel (00 to
89) by pressing the M.IN key.
. Press the microphone PTT switch, or set the
REC/SEND switch to SEND and speak into the
microphone.
Note
Check the intended transmitter frequency before
transmitting to avoid interrupting another QSO.
. Release the PTT switch, or place the REC/ SEND
switch to REC.
67