Ethernet settings
Subnet mask:
Key features
Understand the important features of the projector.
•
Built in warp and blend of projected images
•
Near field communication
•
Multi-lamp module with no lamp alignment required
•
Improved lens mount with bayonet style insertion
•
Single phase 200-240 V
•
Side access to optical adjustments
•
4K resolution for flexibility and future proofing
•
Omnidirectional operation
•
TruLife electronics
•
LCD display to provide information at-a-glance
How the projector works
The Boxer 4K accepts a variety of input signals for projection on front or rear projection screens,
typical in commercial or other large screen applications.
High-brightness light is generated by mercury vapor lamps, then modulated by three Digital
Micromirror Device (DMD) panels responding to incoming data streams of digitized red, green and blue
color information. As these digital streams flow from the source, light from the responding on pixels of
each panel is reflected, converged and then projected to the screen through one or more projection
lenses, where all pixel reflections are superimposed in sharp full-color images.
List of components
Verify all components were received with the projector.
•
Power cord for full brightness, six lamp operation
•
Power cord for limited power, single lamp operation
•
IR remote keypad
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
13