Removing The Server From The Chassis - HPE ProLiant XL170r Gen10 User Manual

Removing the server from the chassis

CAUTION: Before powering down the server, perform a backup of critical server data and
programs. Removing the server while the Do not remove LED is on may result in data loss or
corruption.
CAUTION: To avoid damage to the server, always support the bottom of the server when removing
it from the chassis.
CAUTION: To ensure proper thermal cooling, all server tray slots must be populated with servers or
server tray blanks.
Procedure
1. Back up all server data.
2. Power down the server.
3. Disconnect all peripheral cables from the server.
4. Remove the server from the chassis:
a. Loosen the thumbscrew.
b. Open the locking lever.
c. Slide out the server.
Removing the server from the chassis 21