Toshiba GR200 Series Instruction Manual page 1492

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

Binary output

All binary output circuits provided in the IED are also user-configurable; the user can configure

timers and switches using CPL settings. (For more information of CPL, see Chapter

description: Binary IO module: Binary output circuit

Selection of binary output circuit: For example, Figure 12.6-8 illustrates the

selection of a binary output circuit on a binary IO module. Move the cursor by

pressing keys ▲ and ▼. Press key ► to go to the next level in the hierarchy.

Binary Output

Figure 12.6-8 Selection of slot and binary output circuit

Note: This screen is a sample. The slot numbers displayed are dependent upon the

configuration of the binary IO module in each IED case.

CPL Setting: For example, Figure 12.6-9 illustrates the setting of a binary

output circuit (BO1). Using setting [BI1_CPL] On, the CPL logic in BO1 is

available. Similarly, assigned signals, timers and switches can be set in this

menu. Note that detailed setting items are shown when On is keyed into

setting [BI*_CPL].

6F2S1914 (0.49)

GRL200 (Soft 033 & 037)

Chapters

Table of Contents