Toshiba GR200 Series Instruction Manual page 1027

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

Figure 4.11-6 LN editing screen for SBO mode (for example)

Defining DIR mode

Figure 4.11-7exemplifies the settings in LN "GAPC1" when the DIR mode is required for the

ASEQ01 function. In the DIR mode, the following three items should be selected using the GR-

TIEMS software:

Figure 4.11-7 LN editing screen for DIR mode (for example)

Mapping output data

The user should group the ASEQ01 signals with regard to GOOSE and REPORT; the user

should map them for IEC61850 communication using GR-TIEMS.

Table 4.11-11 shows the signals in the ASEQ01 function that require mapping to the IEC

61850 communications. Figure 4.11-8 shows how to map a signal.

sboClass† (choice "operate-once")

ctlmodel (choice "SBOes or SBOns" )

†"sboClass" can be found by scrolling down

ctlmodel (choice "DOes or DOns")

6F2S1914 (0.49)

GRL200 (Soft 033 & 037)

Chapters

Table of Contents