Toshiba GR200 Series Instruction Manual page 1742

6F2S1914 (0.49)
ILK setting (exercise)
CLOSE/OPEN commands can be issued if operation criteria are passed in ILK function. In the
ILK, either OK or NG-decisions will be published for DPOS01. Generally, we shall make an
interlock-check formula in ILK to generate OK-decision, but we will skip making the formula
in the exercise, for the simplicity. Thus, we will make the formula such that constant_1
(C1_BIT) is injected at the formula always so that OK-decision will be issued unconditionally.
Table 6 Exercise materials in CONST_VALUE (Function ID: 100001)
Step Signals/ [Settings] Signal/[Setting] contents
16 C1_BIT Constant value = 1 in bit type
Step: #15
Step: #16
Step: #17
Step: #18
Step: #19
Figure 8 ILK formula setting
GRL200 (Soft 033 & 037)
- 1719 -