Toshiba GR200 Series Instruction Manual page 1520

Relay and control software
(v)
Verifying the relay software is possible to check codes at Positons 'S, G, and T' on Software
nameplate. For example of Figure 13.3-5, the IED has '033' software†; accordingly, that can
operate in the IEC61850 communication‡.
7
- 2 0 3 3 - 6 6 2 - 3 E
GRL200- --
TOSHIBA ENERGY SYSTEMS & SOLUTIONS CORPORATION
Figure 13.3-5 Software nameplate example on the rear
†Note: For more information about relay functions, see
‡Note: For more information about the communication, see
protocol
.
Flange covers and labels
(vi)
Two flange covers (blue ones in Figure 13.3-6) are included in the package. The user has to put
and screw them on the front of the relay (see succeeding section
Figure 13.3-6 Flange covers and labels attached on IED
Positions
S G T E F U
Pockets for labels
Function keys label
- 1497 -
9 V
Selected language
Selected protocol
Selected software
Chapter Relay application
Chapter Communication
Rack mounting
LEDs label
Flange covers
6F2S1914 (0.49)
.
).
GRL200 (Soft 033 & 037)