Toshiba GR200 Series Instruction Manual page 1448

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

6F2S1914 (0.49)

Tips for settings

During the GR-TIEMS operation, we recommend the user to choose an appropriate file-name

for the setting-file. That is, for example, when the user creates the setting file for an IED at

the first time, the user is required to make it with the name "IED#1-model_01.map". Likewise,

the user can create the other setting file with the name "IED#2-model_01.map" for the other

IED. If the user is required to modify the "IED#1-model_01.map", the user should replace the

name by new name "IED#1-model_02.map". Consequently, the user can easily discriminate the

setting files in the IED model2 (i.e., IED#1-model or IED#2-model) and the revision number

(i.e., 01 or 02).

Figure 11.4-12 shows the editing screen of the GR-TIEMS; the screen has a remark field

concerning to the IEC 60870-5-103 communication. Note the available length of the remark

field is up to 12 in the one-byte character. The remark field is utilized for the control of the

setting data.

Figure 11.4-12 Common setting screen in the GR-TIEMS

Note: We recommend to make the backup file of the setting data.

GRL200 (Soft 033 & 037)

Chapters

Table of Contents