Toshiba GR200 Series Instruction Manual page 1076

†Note: The user can see the signals of the binary input circuits on the IED screen.
User interface: Monitoring-sub menu
Chapter
binary input circuits.
‡Note: Function IDs identify every IO slots. For example, IO#1 slot has been identified by
the function ID "200B001". Therefore, when the user wishes to program the signal
"BI1-CPL" on the BI1A at IO#1, the user should designate its signal using the
function ID "200B001" and Element ID "8001001172". On the other hand, when
the signal "BI2-CPL" on the BI1A at IO#2 is required to program, the user should
designate that signal using the function ID "200B002" and Element ID
"8001001172". For more information with regard to the function ID and the Data
ID at IO#1, see sections 5.4.6(i), 5.4.7(i), and others.
discusses how to see the state of the
- 1053 -
6F2S1914 (0.49)
GRL200 (Soft 033 & 037)