Toshiba GR200 Series Instruction Manual page 1486

On any screen, press the screen-jump function key to display a screen, refer to the
following figure:
Main Menu
10:48
Record
_Monitoring
Setting
IO setting
Time
Test
Figure 12.5-14 Operation of screen jump function
To cancel the screen-jump function, follow the procedure provided in Figure 12.5-15.
Note: 1) Once a screen is configured to a function key, it will not be deleted until a new
screen is configured for the same function key.
2) If a configured screen is disabled by "On/Off Function" setting (refer to section
12.5(iii)), the screen jump function is also disabled for the function key.
Function Key
10:48 1/7
F1 Key >
F2 Key >
F3 Key >
F4 Key >
F5 Key >
F6 Key >
Setting
[◄] x 2
Change Setting?
ENTER=Yes CANCEL=No
[ENTER]
Figure 12.5-15 Cancelling screen jump function
2/8
[ F1 ]
>
>
>
[ F1 ]
>
>
>
F1 Key
10:48
[►]
Function
Screen Jump
Signal
[◄]
No Assign
Logic
Instant
F1 Key
10:48
*Function
No Assign
Signal
No Assign
Logic
Instant
The "Screen Jump" function is
canceled on F1 key.
- 1463 -
OC
10:48 1/4
_OC1EN +>
On
OC2EN +>
On
OC3EN +
Off
F1 Key Function
1/3 10:48
[ENTER]
+ *Screen Jump
Assign Signal
+ [CANCEL] No Assign
+
[▼] x 2
F1 Key Function
1/3
10:48
[ENTER]
+
Screen Jump
Assign Signal
+
_No Assign
+
6F2S1914 (0.49)
1/3
[▲] x 2
3/3
GRL200 (Soft 033 & 037)