Toshiba GR200 Series Instruction Manual page 1009

Rule: The same types of signal monitoring points are provided in every device;
hence, the user can find the same ones for all of the other devices. For
example, when the user wishes to find the "TPOS01_SC_OWS" point for
the 2 device, use the description of "TPOS01_SC_OWS" in place of
nd
"TPOS02_SC_OWS". The user can obtain the ID value of
"TPOS02_SC_OWS" by using the following steps:
Step 1
Step 2
Step 3
Step 4
Find the element ID for TPOS01_SC_OWS (i.e.,
"8001011D51")
identify the number at the fifth digit from the ID. (i.e., "1")
Choose a new device number. (i.e., pick the number "2" for
the 2 device)
nd
Replace the number that occurs at the fifth digit with the
new device number. (i.e., get new ID "8001021D51" of
"TPOS02_SC_OWS") The ID is expressed in hexadecimal
notation. Thus, the user must change the device number
from decimal notation to hexadecimal notation.
- 986 -
6F2S1914 (0.49)
GRL200 (Soft 033 & 037)