Toshiba GR200 Series Instruction Manual page 1741

BIO setting (exercise)
Issuing CLOSE and OPEN commands will be done on BO3 and BO4 circuits, as shown in
Figure 4.
We can make [BO3_CPL]=On and DPOS01_OEX_BO settings on BO3 circuit in order that BO3
driver can issue CLOSE command (#11, #13; see Figure 7). Similarly, for issuing OPEN,
[BO4_CPL]=On and DPOS01_FEX_BO settings can be made (#12, #14), as shown in Table 5.
Table 5 Exercise materials in DPOS01, IO_SLOT1/2 (ID: 512001, 200B01/200B02)
Step Signals/ [Settings]
11 [BO3_CPL]
12 [BO4_CPL]
13
DPOS01_OEX_BO
14
DPOS01_FEX_BO
Signal/[Setting] contents
CPL switch on BO3 circuit
CPL switch on BO4 circuit
Signal for CLOSE
Signal for OPEN
Step: #11 Step: #13
Step: #12 Step: #14
Figure 7 BIO settings
- 1718 -
6F2S1914 (0.49)
GRL200 (Soft 033 & 037)