Toshiba GR200 Series Instruction Manual page 1519

7 8 9 A B
- 2 1 - 3 4 H -
Figure 13.3-3 IO configuration label example (viewing from the back in 3/4 size case)
Note: See Section
structure of IED cases and terminals. For more information about the BI, BO, and
BIO circuits, see Section
Communication modules (LAN and others)
(iv)
Figure 13.3-3 shows communication modules are mounted on C11 to C15. Their layouts has to
be matched with Ordering codes at Positions 'C, D, E, and F'.
7 8
- 2 1 - 3 4 H - 2 1 - 6
Ordering positions
C D E F G H J
2 1 - 6 6 - 3 0 -
IED case and module slot
Binary IO module
Ordering positions
9 A B C D E F
Selected protection signaling module
Figure 13.3-4 Example for module selected
- 1496 -
K L
2 2 0
Type of BIO and PWS termianls
Compression plug type
terminal
Technical description
in Chapter
in the same chapter.
G H J K L
6 - 3 0 - 2 2 0
Selected LAN, Comm., and IRIG
6F2S1914 (0.49)
H Terminal block for BIO and PWS
0 Compression plug type terminal
1 Ring type terminal
Ring type terminal
to find the
GRL200 (Soft 033 & 037)