Interlock/Emergency Stop/Parking Brake - Check; Regeneration Of Dpf Filter - Fayat Group DYNAPAC CC1300 Translation Of Original Instruction Manual

Table of Contents

Advertisement

35
Fig. Control panel
32. Control lamp, fatal error
35. Control lamp, parked regen
(regeneration)
36. Switch for parked regen
(regeneration) of the DPF filter
46
Interlock/Emergency stop/Parking brake -
Check
The interlock, emergency stop and parking brake must
The interlock, emergency stop and parking brake must
be checked daily before operating. A function check of
be checked daily before operating. A function check of
the interlock and emergency stop requires a restart.
the interlock and emergency stop requires a restart.
The interlock function is checked by the operator
The interlock function is checked by the operator
standing up from the seat when the roller is moving
standing up from the seat when the roller is moving
very slowly forwards/backwards. (Check in both
very slowly forwards/backwards. (Check in both
directions). Hold the steering wheel firmly and brace
directions). Hold the steering wheel firmly and brace
yourself for a sudden stop. A buzzer goes on and after
yourself for a sudden stop. A buzzer goes on and after
4 seconds the engine switches off and the brakes are
4 seconds the engine switches off and the brakes are
activated.
activated.
Check the function of the emergency stop by pressing
Check the function of the emergency stop by pressing
the emergency stop when the roller is moving slowly
the emergency stop when the roller is moving slowly
forwards/backwards. (Check in both directions). Hold
forwards/backwards. (Check in both directions). Hold
the steering wheel firmly and brace yourself for a
the steering wheel firmly and brace yourself for a
sudden stop. The engine switches off and the brakes
sudden stop. The engine switches off and the brakes
are activated.
are activated.
Check the function of the parking brake by activating
Check the function of the parking brake by activating
the parking brake when the roller is moving very
the parking brake when the roller is moving very
slowly forwards/backwards. (Check in both
slowly forwards/backwards. (Check in both
directions). Hold the steering wheel and brace yourself
directions). Hold the steering wheel and brace yourself
for a sudden stop when the brakes are activated. The
for a sudden stop when the brakes are activated. The
engine does not switch off.
engine does not switch off.

Regeneration of DPF filter

The machine is equipped with a diesel particle filter
(DPF filter).
The diesel engine does an automatic burnout of
carbon when necessary and no indication is shown
during normal operation.
If the machine is run frequently with partial load,
starting and stopping, and at low temperatures etc., a
parked regeneration may need to be done.
This is indicated when the lamp for Parked Regen
(regeneration) requires (Parked Regen
Requested)(35) starts to flash parallel with the switch
(36).
The operator should park the machine at a suitable
36
place and allow the engine to run.
32
The parking brake should be activated, the machine
should be stationary, and the control lever should be in
neutral.
The engine should be warm.
To start the parked regen, press the switch for Parked
4812162001_D.pdf
Operation
2021-12-14

Advertisement

Table of Contents
loading

Table of Contents