Table of Contents
Advertisement
No
No
Designation
Designation
1
1
Ignition key
Ignition key
2
2
Forward/Reverse lever
Forward/Reverse lever
3
3
Strike-off blade, floating position
Strike-off blade, floating position
(Optional)
(Optional)
4
4
Vibration on/off
Vibration on/off
5
5
Strike-off blade, up (Optional)
Strike-off blade, up (Optional)
6
6
Strike-off blade, down (Optional)
Strike-off blade, down (Optional)
7
7
Central warning indication
Central warning indication
8
8
Direction indicator (Optional)
Direction indicator (Optional)
9
9
Main beam indicator (Optional)
Main beam indicator (Optional)
10
10
Amplitude selector, high amplitude
Amplitude selector, high amplitude
11
11
Auto traction control, TC
Auto traction control, TC
(Anti-spin) (Optional)
(Anti-spin) (Optional)
38
Function descriptions
Symbol
Symbol
Function
Function
The electric circuit is broken.
The electric circuit is broken.
All instruments and electric controls are supplied with
All instruments and electric controls are supplied with
power.
power.
Starter motor activation.
Starter motor activation.
To start: Turn ignition key to the right until the
To start: Turn ignition key to the right until the
display LIGHTS UP, and wait until the displayed
display LIGHTS UP, and wait until the displayed
roller GOES OFF and changes to the status image.
roller GOES OFF and changes to the status image.
NB! When starting the machine, the lever must be in
NB! When starting the machine, the lever must be in
neutral. The engine cannot be started if the
neutral. The engine cannot be started if the
forward/reverse lever is in any other position.
forward/reverse lever is in any other position.
The forward/reverse lever controls both the roller's
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
driving direction and speed. When the lever is moved
forward, the roller moves forward; when the lever is
forward, the roller moves forward; when the lever is
move backward, the roller moves backward.
move backward, the roller moves backward.
The roller's speed is proportional to the distance the
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever
lever is from the neutral position. The further the lever
is from the neutral position, the higher the speed.
is from the neutral position, the higher the speed.
The float mode is activated by pressing and holding
The float mode is activated by pressing and holding
the button for 2 seconds while the machine is in
the button for 2 seconds while the machine is in
Working mode (14) and Strike-off blade (16) is
Working mode (14) and Strike-off blade (16) is
activated.
activated.
First push will start vibrations, second push will stop
First push will start vibrations, second push will stop
vibrations.
vibrations.
Raises the strike-off blade when Strike-off blade (16) is
Raises the strike-off blade when Strike-off blade (16) is
activated.
activated.
Lowers the strike-off blade when Working mode (14)
Lowers the strike-off blade when Working mode (14)
and Strike-off blade (16) on the machine are activated.
and Strike-off blade (16) on the machine are activated.
General fault indication. See the display (33) for
General fault indication. See the display (33) for
description of the fault.
description of the fault.
For detailed information about the fault indication, see
For detailed information about the fault indication, see
the table "Warning indication - membrane panel".
the table "Warning indication - membrane panel".
Yellow warning light - "less serious fault"
Yellow warning light - "less serious fault"
Warning lights red - "serious fault"
Warning lights red - "serious fault"
Shows direction indicators activated (Activated via the
Shows direction indicators activated (Activated via the
steering column switch).
steering column switch).
Shows main beam activated (Activated via the steering
Shows main beam activated (Activated via the steering
column switch).
column switch).
Activation produces high amplitude. (Low amplitude is
Activation produces high amplitude. (Low amplitude is
the basic mode if the button is not activated.)
the basic mode if the button is not activated.)
If the machine is equipped with TC (Anti-spin), this is
If the machine is equipped with TC (Anti-spin), this is
activated when starting up. (TC can be disengaged).
activated when starting up. (TC can be disengaged).
The speed limiter (23) is used to set the maximum
The speed limiter (23) is used to set the maximum
speed at full deflection of the forward/reverse lever.
speed at full deflection of the forward/reverse lever.
4812163801.pdf
Machine description
2019-04-30
Advertisement
Table of Contents
