Adjusting Copying Options; Basic Settings - Xerox Phaser 6128MFP User Manual

Adjusting Copying Options

This section includes:
•
•
•
•

Basic Settings

You can change the following basic settings when making copies:
•
•
•
•
Selecting Color or Black and White Copies
You can create copies in color or in black & white.
1. Press the Copy button.
2. Press the Color Mode button on the printer control panel to change the selection to
Selecting a Tray to Use for Copies
In some cases, you may want to make copies on letterhead, colored paper, or envelopes.
After loading the special paper in the tray, or preparing the media for feeding in the
Manual Feed Slot, select the tray to use for your copies:
1. On the printer control panel, press the Copy button.
2. Select Paper Supply, and then press the OK button.
3. Select one of the following trays to use for the copies:
4. Press the OK button.
Downloaded From ManualsPrinter.com Manuals
Basic Settings on page 71
Image Adjustments on page 72
Image Placement Adjustments
Output Adjustments on page 76
Selecting Color or Black and White Copies
Selecting a Tray to Use for Copies
Selecting the Default Copy Settings
Selecting the Default Copy Settings
Color or B & W (Black & White).
Note: The Color Mode will return to the default setting after the copy job is complete.
To set the default behavior permanently, see
page 72.
• Manual Feed Slot
• Tray
Phaser® 6128MFP Multifunction Printer
on page 75
on page 71
on page 71
on page 72
on page 72
Selecting the Default Copy Settings
71
Adjusting Copying Options
on