Moving And Repacking The Printer; Precautions For Moving The Printer; Moving The Printer Within The Office; User Safety - Xerox Phaser 8510 User Manual

Moving and Repacking the Printer

This section includes:
■

Precautions for Moving the Printer

■

Moving the Printer Within the Office

Preparing the Printer for Shipment
■
Caution: Parts of the system are hot. To avoid personal injury or damage to the system, allow
the ink to solidify. Run the
cool the system quickly.
Precautions for Moving the Printer
To view precautions and guidelines for safely moving your system, see
A-1 in this user guide.
Moving the Printer Within the Office
To move the system within the office:
1.
Close the system's door and covers.
2.
Press the power switch located under the interface cover on the side of the system.
3. Within 10 seconds after turning off the system, select
the control panel.
Note: If you receive a
panel, the system is not ready to be moved. If the printhead is not locked, the system can
be damaged during shipment.
Phaser® 8560MFP/8860MFP Multifunction Printer
on page 8-25
on page 8-25
on page 8-27
Shutdown for Moving System
Power Down Error-Head not Parked
8-25
Moving and Repacking the Printer
procedure on the control panel to

User Safety

8860mfp-117
Shutdown for Moving System
message at the control
on page
on