Reinstall Av-30 In Instrument Panel (If Removed) - uAvionix AV-30 Service Bulletin

Using a 3/16" nut driver, tighten the two [2] Jack Screws to 5in*lbs max. Do Using a 3/16" nut driver, tighten the two [2] Jack Screws to 5in*lbs max. Do Using a 3/16" nut driver, tighten the two [2] Jack Screws to 5in*lbs max. Do
Not Overtighten!
Reattach the original AV-30 Backshell Connector. Using a flat screwdriver,
tighten the two [2] screws to 5in*lbs max. Do Not Overtighten! tighten the two [2] screws to 5in*lbs max. Do Not Overtighten!
8.3.4 Reinstall AV-30 in
If the AV-30 was removed from the aircraft instrument panel, reinstall the 30 was removed from the aircraft instrument panel, reinstall the 30 was removed from the aircraft instrument panel, reinstall the
unit. If the original screws have been misplaced please . If the original screws have been misplaced please observe
9.6 Mounting Screw Length Restriction from the AV 9.6 Mounting Screw Length Restriction from the AV-30 Installation Man
AV-30-E Service Bulletin Software Upgrade 1.1.0 E Service Bulletin Software Upgrade 1.1.0
UAV-1005261-001 Rev A
30 Backshell Connector. Using a flat screwdriver, 30 Backshell Connector. Using a flat screwdriver,
in Instrument Panel (If Removed)
1 Rev A
ve Section
30 Installation Manual.
17