Main menu
Servicelevel 2
6.3.3
Exit OSD
Exit OSD menu
SCD 19102 / SMD 19102
Instruction for Use, 05/2013
Function
DVI enhancer
Status
Settings in this menu may only be carried out by service personnel.
See Service level 2 functions
Accept changes
Reject changes
6.3 Description of OSD menu
Adjustment / setting
range
Information
[}
44]
You exit the OSD and can
save or reject any changes.
Press key 2 if you unintentional‐
ly entered this menu and want
to return to the main menu.
Note: If the OSD menu is exited
by changing the timing or
switching off the monitor, the
changes made are saved.
Start-up
Description
Enhances the DVI-D
signal quality over long
distances, even when
standard cable is used
Current monitor set‐
tings in the respective
picture mode can be
selected here.
•
Operating hours of
the monitor
•
Temperature in the
housing (actual and
maximum tempera‐
ture over the com‐
plete service life of
the monitor)
•
Firmware type and
version
•
OSD version
•
Configuration ver‐
sion
•
Current timing
•
Current source
•
Screen resolution
•
Frequency of the in‐
put signal (line fre‐
quency and refresh
rate)
43