Installing The Base And Cable (Scd 19102) - Eizo SCD 19102 Instructions For Use Manual

19" color and grayscale monitor

Hide thumbs Also See for SCD 19102:

Table of Contents

Connecting

5.8 Installing the base and cable (SCD 19102)

CAUTION

• Only use the power cable in the scope of delivery, or a cable with protective conductor

and appliance plug to DIN 49 547, IEC 320 (max. length 3 m). Furthermore, the cable

must adhere to all local safety regulations applicable to the specific country in which the

monitor is used.

• Device fuses must only be replaced by the repair centers or servicing department.

• Note for North America: Molded power supply plugs must comply with the require‐

ments for hospitals with respect to CSA Std. C22.2 No. 21 and UL 498.

See also

Connection panel

5.8

Installing the base and cable (SCD 19102)

CAUTION

Do not use screws of excessive length

Screws which are too long can damage mechanical and electronic components of the de‐

vice.

1. Attach the connecting cable before installing the stand on the monitor.

2. Slightly tighten the screws on the mounting plate.

[}

19]

SCD 19102 / SMD 19102

Instruction for Use, 05/2013

Table of Contents

Smd 19102