Eizo SCD 19102 Instructions For Use Manual page 40

Start-up
6.3 Description of OSD menu
Main menu
40
Function
Hotkey for PIP activa‐
tion
DPMS setting
DPMS
DPMS Off mode (back‐
light)
LUT choice
LUT backlight com‐
mand
Adjustment / setting
range
Active
Inactive
Default: Inactive
On
Off
Default: On
Dimmed
Off
Default: Dimmed
On / Off
Default: On
Instruction for Use, 05/2013
Description
Activating and deacti‐
vating the PIP window
with key 4 on the front
If "Active" is selected,
the PIP window can be
opened or closed with
the saved settings us‐
ing key 4 on the front
without opening the
OSD menu.
The DPMS (Display
Power Management
System) can be
switched on/off
When the DPMS is acti‐
vated and there is no
input signal, the back‐
light is switched off or
dimmed (depending on
the parameter for the
"DPMS Off Mode": see
below).
This saves energy and
increases the lifespan
of the backlight.
"DPMS Off mode" can
be set to "Dimmed" or
"Off". The backlight is
then either dimmed or
switched off when the
DPMS mode is active.
Permits access to the
backlight
• When "On" is set,
the backlight cannot
be changed in the
"Brightness/
contrast" menu.
• When "Off" is set,
the backlight can be
changed in the
"Brightness/
contrast" menu.
SCD 19102 / SMD 19102