Eizo SCD 19102 Instructions For Use Manual page 48

Start-up
6.3 Description of OSD menu
Servicelevel 2
Others
48
Function Adjustment / setting
range
Reset to factory de‐
Execute
faults
Reboot Execute
Info
On
Off
Default: Off
Serial interface
On
Off
Default: On
Description
All parameters are reset
The following are deleted:
• User settings
• Custom settings
The following are reset:
• Backlight
• Sharpness
• User color location
• Signal adjustment
• Black level settings
• RGB relation
• DPMS settings
• Language
• OSD setting
• Gamma curve
• Standard group
• Info window settings
• Serial interface settings
• H-Scaler clip
The processor is reset
The power supply unit is
not switched off. The moni‐
tor restarts.
To display an info win‐
dow
The info window is dis‐
played on the bottom right
of the screen if the source
changes. It provides more
detailed information about
the set timing.
The serial interface can
be activated or deactivat‐
ed.
If the serial interface is de‐
activated ("Off"), it is possi‐
ble to suppress e.g. the
downloading of firmware.
SCD 19102 / SMD 19102
Instruction for Use, 05/2013