Start-Up; Switching On The Monitor; Operator Controls - Eizo SCD 19102 Instructions For Use Manual

6

Start-up

6.1

Switching on the monitor

• Switch on the monitor using the power switch.
The green operation LED must now light up permanently.
See also
Troubleshooting
6.2

Operator controls

Fig. 9: Front view: Keypad and status LED
The four keys and the status LED are located on the front in the bottom right-hand corner of
the monitor.
The status LED is lit when power is supplied to the device and the power switch is set to On.
Key functions
In the OSD menu, the keys have the following functions:
Key Situation
1 Always
2 Submenu is selected
Function is selected
SCD 19102 / SMD 19102
Instruction for Use, 05/2013
[} 72]
6.1 Switching on the monitor
Action
Scrolling
Select submenu
Increase/change value
Start-up
27